What temperature should a Hot Spring spa be set at?
SET THE TEMPERATURE CONTROL to the desired temperature between 100°F (38°C) and 104°F (40°C), then place the spa cover on the spa and allow the water temperature to stabilize (this could take up to 24 hours). For most people, a comfortable spa temperature in summer ranges between 28°C and 32°C (82°F to 89°F). However, personal preference plays a big role. For those who prefer a cooler experience, setting the temperature closer to 26°C (78°F) can be more refreshing.SET THE TEMPERATURE CONTROL to the desired temperature between 100°F (38°C) and 104°F (40°C), then place the spa cover on the spa and allow the water temperature to stabilize (this could take up to 24 hours).
What is error code 4 on hot springs spa?
Error 4 displays on your spa controller if the heater thermal trip is activated. The possible causes of this error include low water level, dirty filter cartridges, an airlock in pipework, closed shut-off valves, and a filtration pump failure. Water flow sensors are not detecting any or enough water flow in the spa or the spa pump, triggering an E02 code.If you don’t have water in your hot tub yet, this is likely the primary reason for the message. Water flow sensors are not detecting any or enough water flow in the spa or the spa pump, triggering an E02 code. Make sure the water for your hot tub reaches between the “Max/Min” fill line located on the inside of the spa.On AirJet Lay-Z-Spa hot tubs, the warmth of the water can cause distortion of the pipes in the liner. Pipes on initial purchase may be slightly out of shape due to packaging. These kinks and blockages can cause a restriction of the water flow and can cause the E02 error code.
What do the lights mean on a Hot Springs spa?
A GREEN light stands for filtration in the salt system. As long as it’s glowing solid, the filtration is running. The BLUE light is for the heater. As long as it’s solid the water is staying heated. They are indicator lights. A GREEN light stands for filtration in the salt system. As long as it’s glowing solid, the filtration is running. The BLUE light is for the heater. As long as it’s solid the water is staying heated.
Why is the red light blinking on my hot springs spa?
A flashing RED indicator means a problem may exists with the temperature sensor (see Logo Light Troubleshooting section for more information). Power Indicator: The BLUE indicator is ‘on’ when the spa is properly supplied with power. An ‘off’ BLUE indicator means that there is a problem with the spa control box or the power supplied to the spa (see Logo Light Troubleshooting section for more information).Understand the Problem Blinking Power (Blue): Indicates a problem with water flow or heating. Blinking Ready (Green): The spa cannot maintain the set temperature due to a flow or heating issue. These lights often point to a flow issue, which prevents the heater from operating properly.