Why is my hot tub touch screen not responding to touch?

Why is my hot tub touch screen not responding to touch?

For an unresponsive Clearwater hot tub touch screen, first perform a system reset by powering off the unit completely for 5 minutes. Check the control panel ribbon cable connection for looseness or damage. Inspect the circuit board for moisture or corrosion, which can cause erratic behavior. Open the spa cover and let the spa cool down for 10 minutes, then touch the control panel to reset the circuits, or push a red reset button on air systems. For OH, HH or HOT trouble codes, an overheating hot tub is not usually a heater problem. It is almost always a flow problem.The most important thing to remember when fixing a flow error (or any hot tub error code) is to turn off power to the hot tub for at least 30 seconds before turning it back on. This allows the hot tub to fully power down and reset.If your hot tub temperature is all over the place, you could have water flow problems. Start by cleaning your filter, checking for circulation blockages, and topping off your water if necessary. Check whether your pump turns on. Your pump has to be running in order for the spa to heat up.

How do I get my hot tub to work again?

Check the main circuit breaker that provides power to the spa. This may be located in the home main panel, or inside a smaller panel near the hot tub. To reset a circuit breaker, first push it towards OFF, and then flip it back to ON. To unlock your Hot Spring spa controls, first locate the control panel’s lock button or combination (often holding ‘Jets’ and ‘Light’ buttons for 5 seconds). This disables the control lock feature. If unavailable, power cycle the spa by turning off the breaker for 30 seconds, then restart.

How do you clear the error on a hot tub?

Try resetting your hot tub by turning off the power and then turning it back on again. Sometimes, a simple reset can resolve minor issues. For a comfortable soak, most people set their hot tub between 100 °F and 102 °f (37. C – 39 °C). Healthy adults are safe to soak at these moderate temperatures for twenty minutes at a time.Staying in your hot tub too long can result in dizziness, light-headedness, overheating and dehydration, especially if you’re soaking at a higher temperature. It can also cause burns, decrease in blood pressure, increased heart rate, nausea and vomiting.

Leave a Reply

Your email address will not be published. Required fields are marked *